(Discontinued; ASM1051E has been substituted for ASM1051U)

ASM1051U is the single chip solution to bridge both SuperSpeed USB (USB3.0) and High Speed USB (USB2.0) to Serial ATA. It is highly integrated with ASMedia SuperSpeed USB3.0, High Speed USB2.0 and SATA1.5/3.0 Gbps self-design PHYs, and support UAS protocol Transport to enhance the storage performance. Customers can easily enhaced their storage device performace via ASM1051 since ASM1051 also integrated CPU and embedded RAM to provide a leading edge solution in USB to SATA device enclosure market.

- Feature

* Compliant with USB3.0 Specification Revision 1.0
* Compliant with USB Specification Revision 2.0
* Support USB Super-Speed, High-Speed and Full-Speed Operation
* Support USB Mass Storage Class, Bulk-Only Transport Specification Revision 1.3
* Compliant with USB Attached SCSI Protocol Rev.0.8a
* Compliance with Serial ATA Specification Revision 2.6
* Support Native Command Queue
* Support ATA/ATAPI Packet Command Set
* Support ATA/ATAPI LBA48 addressing mode
* Support 20MHz External Crystal
* Integrated internal 3.3V to 1.2V voltage regulator
* Support I2C NVRAM for Vender Specific VID/PID of USB Device Controller
* Support SPI NVRAM for Vender Specific Application of USB Device Controller
* Support multi-GPIO pins
* HBM ESD 2.5KV